THERMAL DESORPTION UNIT

Our plant employs an environmental remediation technology that utilizes heat to increase the volatility of contaminants such that they can be separated from the solid matrix; typically soil, sludge or filter cake. It offers a method of separating and recovering. We use the Porcupine Processor which ensure the following results: Consistently discharge processed drill cuttings with TPH (Total Petroleum Hydrocarbon) limits below 10000 mg/kg (1% by weight as required by legislation).

Recover the base oil without any measurable degradation allowing its reuse.
Use the volume of water recovered to re-hydrae the solids discharge, thereby reducing the waste stream.
Potentially allow the oil and solids waste streams to be treated as commodity items.
Produce a lower environmental impact compared to earlier generation indirect rotary kiln type systems.

HOW DOES IT WORK?
The Porcupine Processor is a low temperature indirect thermal desorption system utilizing a closed loop heat transfer fluid. Drill cuttings or sludge, of any composition are conveyed into a feed hopper prior to entering the processor. The cuttings are heated to a maximum temperature of 3400C to produce water and oil vapours and clean dry solids. The water and oil vapours are condensed in the Vapour Recovery Unit and phase separated.

SCAFFOLD

Our range of products includes; Scaffold Tube and Fittings, Kwik-Stage System, Jacks, Props, Box Floor Centres, Econo Panels with accessories, Ringlock Scaffold System and also as per specific customer requirement.
With the rising demand for modernization in construction, safety regulations and better working condition, we are conscious of the need to ensure safety, high quality standards and customer satisfaction.

Offshore Container Carrying Units
Scaffold
Shaker Screen

PH CONTROL

– Caustic Soda Flakes/ Pearls
– Potassium Hydroxide
– Soda Ash dense/ light
VISCOSIFIERS & FILTRATE REDUCER
– Xanthan Gum Oil Drilling Grade
– Xanthan Gum Dispersible Grade
– PAC LV/ HV/R
– CMC LV/HV
– Bentonite API/OCMA Grade
– HEC
– SPNH
WEIGHTING MATERIAL
– Barite
– Calcium Carbonate
– H2S Scavenger: Zinc Carbonate
THINNERS DISPERSANTS
– Calcium Lignosulphonate
– Sodium Lignosulphonat

PERSONAL PROTECTIVE EQUIPMENT (PPES)

We offer the very best of protective gear and equipment for work. Our PPE product range includes the following:
– Goggles and Spectacle
– Protective Coveralls
– Smoke Hood
– Cotton Rubber Dotted Gloves
– Neese Flame-Resistant Slicker Suit
– Ear Plugs
– Ear Muffs
– Safety Boots
– King Gloves

SLING FABRICATIONS & LIFTING ACCESSORIES

We provide our clients with slings and lifting accessories fabricated from tools and products from Van Beest in the Netherlands and Talirut in the United Kingdom. Both international manufacturers offer the highest quality in the following:
From Talirut, UK:
– Press Dies and Tools
– Ferrules and Swaging Products
– Aluminum Ferrules
– Solid Thimbles
From Van Beest, Nethelands:
– Shackles
– Green Pin Master links with Flat Part
– Green Pin connecting links for connecting grade 80 chain-slings
– Green Pin Wire Rope Clips generally to EN13411-5; Type B
– Wire Rope Clips generally to EN13411-5; Type A
– Wire Rope Clips generally to DIN 741

HOSES

We stock and supply the very best of Hose Coupling and corresponding accessories including;
– Sunpool Stainless Steel Fittings (various sizes)
– Sunpool Camlocks (Aluminum/ Stainless Steel/ Brass)
Rotary Drilling Hoses
– High Pressure Hydraulic Hose
– Test Point Hose
– Accessories: Hydraulic Tube Couplings, Ermeto Fittings, Equal Union, Elbow and Tree.

TANK CLEANING

We have a well – trained service team (Confined Space Certified) with experience in Offshore, Onshore and Vessel Tank Cleaning jobs in Cameroon, Equatorial Guinea, Ivory Coast and Ghana.

OTHER SERVICES

We also run other services including:
Testing
Slick Line
Well Logging
Filtration

RENTALS

OFFSHORE CONTAINER CARRYING UNITS

As part of our Oilfield Products Distribution Services, we stock the following range of Cargo Carrying Units (CCUs) and Tote Tanks for rental across the African sub-region:
Mini Containers
10 ft. and 20 ft. Dry Containers
Mud and Boat Skips
10 ft. and 20 ft. Half Heights Containers
10 ft. and 20 ft. Open Top Containers
500 gal. and 4,000 lt. Portable Chemical Tanks
20 ft., 26 ft., 36 ft., and 46 ft. Basket Containers
10 ft & 20 ft Offshore Reefer Containers
Our CCUs are properly certified and meet international standards, including:
IMO MSC/Cir. 860; EN12079-1:2006; DNV2.7-1:2.6

DRILLING CHEMICALS

We have expanded our delivery base into a fully integrated supply chain management multinational specializing in industrial chemicals for well drilling, food and pharmaceuticals. Our QC department ensures the procurement and delivery of high quality products according to the specifications of our clients.
Our exhaustive list of Chemicals includes:

DRILLING FLUIDS/ CHEMICAL FLUID SERVICE
– Calcium Chloride powder/ granules/ flakes
– Sodium Bromide liquid/ solid
– Calcium Bromide liquid/ solid
– Zinc Bromide powder/ solid
– Zinc/ Calcium Bromide liquid
– Potassium Formate liquid/solid
– Sodium Formate powder
SHATE INHIBITORS
– PAM: Polyacrylamide
– PHAPA: Partially Hydrated Polyacrylamide
– Asphalt Sulphonate

FRACTURING FLUIDS CHEMICALS CEMENTING CHEMICALS

SPILL KITS

We have put together the most comprehensive range of spill prevention and control products currently available. These are cataloged into two new absorbent and spill kit ranges, and they include the following:
– Pillows and pans for high-volume leak
– Absorbent pads and rolls
– Spill kits and refills
– SPKU-DUFF Universal Duffe Kit

CENTRIFUGE

Centrifuges are widely used in solid control system to separate the solids phase of mud, remove harmful fine drill solids (such as debris) in the mud fluid, or recover weighting materials (such as barite) so as to reduce the cost of mud fluid. We currently procure and supply the following models:
– Centrifuge MS1456
– Centrifuge MD-LW350
– Centrifuge LYNX 200-700

HSSE

VERTSEN Energy believes that all undesired events can be avoided through planning and compliance with protocols. We promote a responsible Health, Safety, Security and Environment (“HSSE”) culture with an HSSE-first attitude amongst all employees and third-parties working with the company.
We will always do our utmost to protect the health, safety and security of our workforce and the communities in which we operate. We believe that we must at all times be vigilant, disciplined, and always look out for one another - as partners in development.
Aker Energy strives to execute operations in a way that avoids harm, damage and injuries to people, the environment and financial assets, avoids work-related illness ensuing from operations, and ensures the technical integrity of our facilities.

The environment

Vertsen Energy will minimise direct and indirect negative influences on the external environment and avoid them completely where operationally feasible. We will work to ensure natural resource efficiency and to limit greenhouse gas emissions and always adhere to relevant international and local laws and standards.